Key points at a glance
- ✓The three phases: rough cleaning, fine cleaning and handover cleaning
- ✓What DIN 18299 means for cleaning services
- ✓Typical pitfalls and what sets good providers apart
- ✓Cost factors and how to get a realistic quote
- ✓Handover inspection checklist
The three phases of post-construction cleaning
Professional post-construction cleaning is divided into three consecutive phases. Each phase has different tools, different goals and different costs. Commissioning all three together saves time and coordination effort.
- 1
Rough cleaning (final building clean)
Removal of large quantities of construction dust, debris, material remnants, packaging and protective film. Construction vacuum cleaners, shovels and industrial extraction systems are used. Often carried out in parallel with the end of the trade work, sometimes even while finishing trades are still on site.
- 2
Fine cleaning (deep cleaning after construction)
Detailed deep cleaning of all surfaces: plaster dust, paint and adhesive residue on window panes, silicone splashes on fittings, mortar residue in joints, protective film residue on floors. Requires specialist products and manual work, as not everything can be removed by machine.
- 3
Handover cleaning (pre-handover cleaning)
The final pass shortly before the handover date: polishing all glass surfaces, final checks of the sanitary rooms, removing the last fingerprints and dust deposits left after trade work. The aim: the condition the client finds at the handover inspection.
What DIN 18299 says about post-construction cleaning
DIN 18299 is the overarching standard of the German construction contract procedures (VOB) and sets out general provisions for construction work of all kinds, including cleaning work on construction sites. For post-construction cleaning, what matters in particular is the clear distinction between cleaning that falls within each tradesperson's scope of work and what must be explicitly awarded to a specialist cleaning contractor.
Put simply: the painter is obliged to clear up their own mess. Thoroughly cleaning all floors, glass surfaces and sanitary fittings after all trades have finished, however, is a separate service that must be regulated by contract, otherwise there will be disputes at handover about who was responsible for what.
For developers and general contractors, we recommend defining post-construction cleaning as a separate trade at the tender stage and awarding it to a specialist. This prevents disputes over responsibilities and ensures that an experienced provider is involved in site planning early on, in good enough time to coordinate cleaning dates with handover dates.
The most common mistakes in post-construction cleaning, and how to avoid them
In practice, post-construction cleaning often fails because of the same mistakes. If you know them, you can avoid them:
Commissioned too late
If the cleaning contractor is booked 48 hours before the handover date, professional work is hardly possible. Allow at least 1-2 weeks' lead time for fine cleaning, and book early.
Cheapest bidder instead of a specialist company
A dumping price sounds tempting but generally produces incomplete work. Adhesive residue, plaster dust on glass surfaces and protective film left in place lead to defect notices at the handover inspection.
No preparation of the handover record
Without a cleaning report and photo documentation, you cannot prove that the surfaces were cleaned if defects are raised. A good provider supplies records automatically.
Rough and fine cleaning not kept separate
While tradespeople are still on site, fine cleaning makes no sense. Rough cleaning and fine cleaning must be clearly separated in time, with a final phase only after all trades have left.
No access to all areas
Basement areas, plant rooms, lift shafts and roof terrace access points are often forgotten. Make sure the cleaning contractor has access to all areas included in the handover scope.
DIY post-construction cleaning vs. a specialist provider: what pays off?
Some building owners try to carry out post-construction cleaning with their own staff or temporary workers. It seems cheaper, but rarely is:
| Criterion | In-house cleaning | Ferman post-construction cleaning |
|---|---|---|
| Specialist cleaners | Standard household products are often not enough for construction residue | Professional paint strippers, silicone removers and window cleaners for construction sites |
| Machines | No industrial vacuum cleaner or scrubber-dryer available | Full range of post-construction cleaning machines |
| Handover security | No record, no proof if defects are raised | Complete signed handover record |
| Time pressure | Underestimated effort leads to delays | Realistically planned process, additional teams if needed |
| Liability | Damage to materials is at the building owner's expense | Covered by liability insurance, damage caused by cleaning is covered |
Handover checklist: what needs to be right at handover?
Floors
- ✓Protective film fully removed, adhesive residue dissolved
- ✓Joints clean, no mortar or plaster residue
- ✓Surface streak-free, glossy on high-gloss floors
- ✓Transitions and skirting boards cleaned
Glass surfaces
- ✓Construction adhesive, protective film remnants and mortar splashes removed
- ✓Panes streak-free, frames clean
- ✓Skylights and glass roofs, inside and out
Sanitary rooms
- ✓Limescale and construction residue removed from fittings, basins and shower
- ✓Joints free of discolouration and clean
- ✓Mirrors and shelves streak-free
Other
- ✓Stairwell, lift and underground car park cleaned as well
- ✓Basement and plant rooms broom-clean
- ✓Waste and construction site debris fully disposed of
- ✓Before/after photo documentation available
Author
Tolga Ferman
Owner, Ferman Industrieservice
Practical knowledge from industrial and building cleaning in Hesse. As of: 2026-08-30.
Conclusion
Post-construction cleaning is the last impression a building makes before the first resident, tenant or buyer moves in. Cutting corners here risks renegotiation, delays and, in the worst case, legal disputes. Ferman Industrieservice carries out post-construction cleaning throughout Hesse, with its own machinery, experienced staff, complete documentation and realistically calculated quotes. Talk to us early, ideally during the planning phase of your construction project.
Frequently asked questions
What does post-construction cleaning cost per m²?+
That depends on the property: rough and fine cleaning, proportion of windows, floor coverings and time pressure determine the effort – industrial halls and special properties differ from offices. With plans or photos, you will receive a quote within 24 hours, at a fixed price after a site visit.
When should post-construction cleaning be commissioned?+
Ideally 2-3 weeks before the planned handover date. This allows rough cleaning in parallel with the end of the trade work and fine cleaning after all trades have left, with enough buffer for rework.
What is not part of post-construction cleaning?+
Post-construction cleaning cleans all existing surfaces, but it does not remove workmanship defects (e.g. paint damage, scratches in the floor). Damage that becomes visible after cleaning is a construction defect and must be rectified by the responsible tradespeople.
Can post-construction cleaning take place on an active construction site?+
Rough cleaning yes, fine cleaning no. As long as tradespeople are still on site, fine cleaning makes no sense. We coordinate the timing with your site manager or general contractor to schedule the phases optimally.
Does Ferman issue a handover record?+
Yes, on request we prepare a complete cleaning record with photo documentation and handover confirmation. This document can be presented to the buyer or tenant when the keys are handed over.
Is post-construction cleaning also carried out at short notice?+
Where capacity is available, yes. For emergency handovers we can also schedule an appointment within 24-48 hours. We do, however, recommend planning early, as good cleaning providers are mostly fully booked around quarter-ends and year-end.
What happens if tradespeople are still doing rework after post-construction cleaning?+
That happens. In this case we recommend a short follow-up clean of the affected areas directly before the handover date. Ferman charges for this follow-up on an hourly basis, and we state this openly in the quote.
