Skip to main content

Steam Cleaning: Hygienic & Eco-Friendly

Professional steam cleaning for industry and commerce: hygienic cleaning with superheated steam, chemical-free and eco-friendly. Ideal for machines, plants, floors and hygiene-sensitive areas.

What is steam cleaning?

Steam cleaning is a hygienic, eco-friendly cleaning method that uses superheated steam at temperatures of 100–180 °C. The hot steam loosens grease, oil and dirt and reduces germs, usually without any chemical cleaning agents.

In hygiene-sensitive areas such as the food industry, pharmaceutical production or healthcare, steam cleaning is the first choice. The steam penetrates the smallest pores and crevices and removes even stubborn dirt without damaging the material.

Unlike chemical cleaners, steam cleaning leaves hardly any residues and needs very little water. Ideal for areas where food is processed or sensitive products are made.

Our equipment: 10 bar industrial steam cleaner

We work with an industrial steam cleaner that combines steam, hot-water rinsing and cleaning agent in a single unit. The boiler is refilled during operation, so your job runs through without cooling breaks.

10 bar
Steam pressure
188 °C
Boiler temperature
3 in 1
Steam, hot water, cleaning agent
Nonstop
Refilling during operation

Benefits of steam cleaning

✓Hygienic & disinfecting

Superheated steam significantly reduces bacteria, viruses and germs, entirely without chemicals. Ideal for hygiene-sensitive areas in the food industry, pharma and healthcare.

✓Chemical-free

No chemical cleaning agents needed. Eco-friendly, no residues, no health hazard. Perfect for food areas.

✓Gentle on materials

Steam cleans gently without mechanical abrasion. Suitable for sensitive surfaces, stainless steel, plastics, seals.

✓Deep-acting

Steam penetrates the smallest pores, crevices and gaps. Also reaches hard-to-access areas and corners.

Areas of application for steam cleaning

Steam cleaning is universally applicable, wherever hygiene, freedom from residues and care for surfaces come first. The main areas of application in industry and commerce:

Food industry & food production

Steam cleaning is the preferred cleaning method in the food industry because it needs no chemicals and leaves no residues on food contact surfaces. Used on production lines, filling plants, packaging machines, conveyor belts, mixing vessels and floors. Disinfects reliably against listeria, salmonella and other foodborne germs in line with HACCP requirements.

Pharma & Laboratory

In the pharmaceutical industry and in laboratories, chemical-free cleaning methods are often mandatory. Steam cleaning meets GMP requirements for cleanliness and freedom from contamination. Used on production plants, filling plants, cleanroom accessories, airlocks, floors and walls. No carry-over of cleaning agent residues into the production process.

Machines & Production Plants

For machines with limited water resistance or sensitive surfaces, steam cleaning is the right choice. The steam cleans selectively with little moisture, without forcing water into sensitive areas. Suitable for conveyor systems, packing machines, dosing systems, moulds and tools, and surface finishing plants.

Sanitary Facilities, Kitchens & Staff Rooms

Sanitary facilities in industrial plants, canteen kitchens and staff rooms are subject to hygiene regulations and are thoroughly disinfected by steam cleaning without aggressive chemicals. Tiles, joints, fittings, drains and hard-to-reach corners are cleaned and disinfected completely.

Steam cleaning during ongoing operations

A decisive advantage of steam cleaning over wet cleaning is the minimal amount of moisture introduced. Steam is gaseous; it condenses on the surface and cleans it without carrying water into machine slots, electrical components or packaging lines.

In many cases this allows cleaning during, or immediately before, the next production cycle. Cleaning times and intervals can be coordinated with shift planning so that no additional production stoppage occurs. For the food industry this means: cleaning and disinfection between two production runs, without long waiting times.

✓No wet residues, no drying effort
✓Cleaning between shifts without a production stop
✓Cleaning individual machine parts section by section
✓Ready for operation immediately after cleaning
✓Combination with disinfection in a single pass
✓No chemical disposal, no safety data sheet handling

Steam cleaning vs. other methods

CriterionSteam cleaningChemical cleaningHigh pressure
HygieneVery goodGoodMedium
Environment100% eco-friendlyHarmfulNeutral
ResiduesNoneYesNone
Food areasIdealLimitedConditional
Gentle on materialsVery goodMediumGood
Drying timeMinimalHighMedium

Steam cleaning in Hesse

Ferman offers professional steam cleaning for industrial and commercial businesses throughout Hesse, from Frankfurt, Wiesbaden and Darmstadt via Gießen, Kassel and Fulda to the Rhein-Main-Kreis and the Taunus. We come to you; mobile steam cleaners are brought directly to your site.

Our steam cleaning service is particularly in demand among food manufacturers and processors, pharmaceutical companies, caterers and commercial kitchens, hospitals, and general industrial businesses that want to switch to chemical-free cleaning. Contact us for a free initial inspection and a no-obligation quote.

Frequently asked questions about steam cleaning

Is steam cleaning really disinfecting?▼

Superheated steam above 100 °C significantly reduces bacteria, viruses, moulds and mites. That is why it is widely used in the food industry and healthcare, often entirely without chemical disinfectants.

Is steam cleaning suitable for electrical systems and machines?▼

With limitations. Steam cleaning introduces less moisture than wet cleaning but is not as electrically safe as dry ice blasting. Open control cabinets or unprotected electronics should be treated with dry ice blasting. For machine housings, stainless steel surfaces and the exterior of machines, steam is well suited.

How long does a steam cleaning job take?▼

That depends on the size of the area to be cleaned and the degree of soiling. Smaller machines or plant sections: 1–3 hours. Larger production areas: half a working day or a full day. We agree the schedule with your production management so that cleaning runs with as little interruption to operations as possible.

Which surfaces and materials can be cleaned with steam?▼

Stainless steel, aluminium, tiles, concrete, rubber, many plastics, glass and painted surfaces tolerate steam cleaning well. Not suitable: untreated wood surfaces (they swell), open, unprotected electronics, heat-sensitive plastics (e.g. certain PVC films) and surfaces with damaged coatings.

Can you combine steam cleaning with other methods?▼

Yes, and we often recommend it. For heavily soiled floors or outdoor areas we combine steam cleaning with high-pressure cleaning. For machines with sensitive electronics we add dry ice blasting for the more sensitive zones. This gives the best result with the gentlest method for each area.

Is steam cleaning more expensive than chemical cleaning?▼

Not necessarily. In the overall calculation, the costs of cleaning agents, disposal and drying time fall away. Especially with regular cleaning cycles and larger areas, steam cleaning is economically competitive or cheaper. For a specific quote we carry out an initial inspection free of charge.

Next step

Request a free quote

Briefly describe your needs. We are available 24/7, reply in under 2 hours and send your quote within 24 hours, often sooner.